Skip to main content
Get In Touch

News & Articles


Customized Russell Finex 22” Vibrating Screen

Russell Finex delivers high specification Finex 22” vibrating screen to a leading pharmaceutical manufacturer

22" vibrating screen Companies working in the pharmaceutical industry require the highest standards of usability, design and performance in all of their processing equipment.  Russell Finex have been working closely with leading pharmaceutical manufacturers for the past 80 years and have continually carried out and implemented extensive research to ensure these high standards are met by their equipment.

When approached by one of their key pharmaceutical customers for an upgrade to their existing Russell vibratory sieving machine, Russell Finex supplied a customized Finex 22™ vibrating screen to better suit their changing needs. The Finex 22™ is a unique machine which has remained one of the most popular choices in the pharmaceutical industry for over 30 years, and is ideal for check-screening and grading pharmaceutical powders and pellets.

For this particular application, a double deck Finex 22™ was supplied fitted with a 1600µ mesh on the top deck and a 800µ mesh on the bottom deck. This allowed the customer to grade small batches of product. The bottom mesh included a scroll frame to ensure a better flow of the material across the entire screening area is achieved. An easy-clean mirror polished magnetic separator was also fitted to the bottom deck to ensure any ferrous contamination is removed before the material progresses further down the process line. The machine was supplied in high quality 316L stainless steel and was fully mirror polished to a documented 0.2-0.6Ra value.

As this vibrating screen machine needed to be at a certain height to fit in with the existing process line, the sieve was supplied on a stand. However, due to regulations the stand cannot exceed a certain height. Therefore to ensure the machine was of the height requested by the customer, an extended base was also added. An enclosed system was needed to transfer the product from the sieve to the next stage in the process. Therefore the discharge from the outlet was angled downwards and fitted with tri-clamp assembly to enable the material to pass straight to a drum via a flexible connector to the drum. As the machine was to be used within different processing lines, a blanking assembly was also added to the outlet to enable the customer to close the oversize outlet when required. A final modification was the addition of a viewport to enable operators to inspect the material as it is being screened.

Prior to despatching the machine, a Factory Acceptance Test (FAT) was carried out where the customer visually inspected the machine at the Russell Finex factory. With the FAT passed, a comprehensive Documentation Pack was then issued, which included the full FAT report, mill certification, certificates of conformity and FDA declaration letters to ensure faster validation during commissioning.

For more information about the product visit the Russel Finex Vibrating Screens page.